250L Monoblock Hot Water Heat Pump – HP250M1U1 – Supplied and replaced

Overview

Installation Allowance Includes:

• Replacement of an existing hot water system only
• Supply of the chosen unit
• One site visit
• Travel within 30km of the Auckland Harbour Bridge (additional travel costs apply beyond this distance)
• Removal and disposal of the old electric hot water cylinder, provided it can be easily removed from the cupboard (additional charges apply if cupboard demolition is required)
• Connection to existing hot and cold water pipes within the hot water cupboard, with up to 6m of 20mm Auspex pipe (additional charges apply for longer pipe runs)
• Allowance for connection to copper or polybutylene pipes (other pipe materials may incur additional charges)
• One 600×600 paver for the Haier heat pump, unless a suitable concrete path or driveway is already available
• New mains pressure valve kit
• Stainless steel restraint kit and 100mm packers, securely fastened to the house
• Copper pipework for external water pipes, connecting directly to existing plastic pipes as they exit the house (additional costs apply if the Haier heat pump cylinder needs to be located further away)
• Commissioning of the Haier heat pump hot water cylinder upon completion of plumbing work
• Installation by a registered electrician and our certified plumbing contractor

This price Excludes:

• Any items not specifically mentioned above
• Building works, such as patching holes, removing and reinstating GIB, or any required wall modifications for pipework installation, including stopping and painting
• Ferry travel, parking fees, or tolls, if applicable

*Terms of Trade Conditions Apply

Full Product Specification can be viewed here

Total water capacity:246L

The Haier Heat Pump Hot Water technology results in a 70-79% reduction in electricity used to heat the same volume of water compared to an electric-resistance water heater. It is highly efficient compared to electric resistance or gas water heaters, complements Solar PV systems, runs only on electricity, and uses the natural refrigerant R290. The performance of the Haeir Heat Pumps in most New Zealands climates from -7C to 45C ambient air temperature. Furthermore, the unit uses the SmartHQ™ app on your smartphone to easily select from five modes to best suit your needs, allowing you to adjust heating to lower-cost periods, minimise energy use when you’re on vacation, or prioritise solar energy to reduce grid-supply if you have Solar PV.

Low GWP Refrigerant: Our Heat Pump Water Heater uses R290 which has a global warming potential (GWP) of 3. Many heat pumps use R134A. R290 has a global warming potential that is 476 times lower than R134A. As many refrigerants are strong greenhouse gases, the use of refrigerants with low GWP is seen as a way to minimise the effect of refrigeration systems on global warming.

Eco Mode: Eco mode optimizes the benefits of Solar PV and lower cost, time-of-use electricity.The Solar optimisation mode (PV) and time-of use mode (HC) receive a communication signal from an energy management control system (if you have an existing Solar PV system). Alternatively, a timer is used to set heating to the low cost periods of a time-of-use tariff.

Longevity: Using patented technology with a triple layer protection creates a long lasting, acid and alkali corrosion resistant inner tank. The inner tank is tested to over 160,000 cycles to ensure durability over the expected lifetime.

Connected: Built in Wi-Fi module and SmartHQ™ allows control of the appliance from anywhere. Change between five user modes at the tip of your fingers by opening SmartHQ™ on your smartphone.Terms & Conditions Apply*